Add a Sparkle to Your Fiat 500 Key Fob
These adorable Silicone Covers will add a touch of fun to your Fiat 500 Key fob. The covers are easy to install and place them over the black cover.
The silicone covers shield your keys from splashes and dust. They also make your key look more stylish. The signals of the remote control are not affected and work even when the cover is closed.
Keep your keys safe from splashes, dust and other contaminants.
This silicone cover will add a touch elegance to your key. It fits perfectly around your key fob without loosing. It shields your key from dust and splashes. The signals generated by your key remote will not be affected by the silicone cover, therefore you can use the buttons on your key fob just as normal.
Accessorize your Fiat 500 with these funky covers in Grey and Black. These covers are perfect if your original cover is looking worn, scratched or damaged. The covers are made of high-quality silicone. They come with two key rings so you can switch them out whenever you are bored with one colour.
These covers are designed to replace the black key cover that comes with your vehicle. You'll need to remove the original key cover first before installing these covers.
fiat punto key replacement is a unique and famous Italian brand, and their cars have an incredible design that sets them apart from the crowd. These stylish car key covers are a simple and enjoyable method to add a bit of glamour to your keys, without being too loud. They look amazing on your key fob, and can be used to refresh the look of a worn-out key.
The covers snap in the desired position and are designed to replace your black cover. It is recommended to remove the original cover prior to installing the new one.
They come in Grey as well as black. The fiat logo is printed on both. So if you change your mind, you can always switch it up! They also make great gifts for Fiat 500 owners.
Easy to install
Fiat 500 key covers can be a great method to upgrade your keys. They come in a range of styles and colors, so you'll be able to find the perfect one to match your personality. The most appealing aspect is that they're simple to install, meaning you can install them yourself in just ten minutes. You will require a screwdriver and some patience. The first step is to remove the original cover. This must be removed before the new cover can be installed.
After you have removed the cover, you can make use of a flathead tool to remove the four major attachment clips from the driver side of the fob assembly. These are marked with red on the photo below. Also, note the tabs for locating slots shown in yellow that require disengagement in addition.
After taking the battery off, replace it with a new # CR2032 3 Volt coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening on the fob and that the -" negative side is facing the rubber buttons.
Replace the cover of the passenger's side mirror by aligning locating tabs. After you've done this place the fob that's on the driver's side back into your vehicle and test it. Press the push button located at the top of the key. If everything is working correctly, the parking lights should be activated and the doors will automatically lock.
Easy to remove
Fiat 500 Key Covers are a great way to update your key fob. They're easy to install and provide a unique appearance. They protect your key fob against smudges, scratches and dirt. For you to replace the cover, you will first have to remove the previous one from your vehicle.
It's easy to accomplish this by pressing the "Fiat" red button on the front face of your key fob. By pressing the button, the lever will be released that lets you slide out the ignition switch made of metal (1). After you remove the metal keys you will see an unassuming silver switch with images of a padlock that are locked and unlocked beside it. This is the battery switch for the key fob. It is easy to change the battery by turning the switch quarter turn using an inexpensive screwdriver that is flat.
The key fob has a microchip that communicates with the Body Control Module. When you insert your Fiat key, it presses the button on the ignition switch that is used to remind you of the "key-inignition". The BCM will then read the transponder that is on the key fob in order to confirm that it's a valid key.
You can also add a sport-inspired twin pack to your key covers to give it an unique and funky appearance. These covers snap over the original cover. They are available in Cream or silver. The key cover will only work only if the original black cover is removed from your key fob.